How to Prepare Your Car for Wrapping

Below are some of the ways through which you can prepare your car for wrapping; First, to ensure that the paint is clean without any wax and dirt, it is washed properly. It is also important to alleviate or rectify any dents or scratches that may be present on the furniture. Then trim any additional appurtenances like antennas if any, must also be eradicated. Pat the surface until it is totally dry and no traces of moisture is car wrapping. These steps help in the installation and securing of the automobile wrap, which guarantees the longevity of the car wrap.

1. Clean the Vehicle

To begin the exterior cleaning, wipe your car so as to remove dirt which will be followed by a thorough washing. Wash the material with soap and water to remove all forms of dirt, oil deposits or grease. These areas should be given special attention as far as the application of the wrap is concerned.

2. Dry Completely

Cleaning it is followed by drying the car's the complete secret of success. Basically, any dampness left on the surface will hinder the ability of the wrap to stick well to the surface. By using microfiber towels you will have the best results.

3. Inspect for Damage

You should also consider if your car has suffered from any form of exterior damage such as dents, scratches or paintwork. These are some of the downsights that have to be worked out so as to get a better finish after the car wrapping process.

4. Remove Accessories

Remove all ornaments such as antennas, mirrors, or trims that may be an obstruction to the wrapping process. This will in turn provide a clean surface hence giving a good surface to apply on.

5. Fix Minor Dents

If the above process reveals any signs of small dents then you should apply a dent repair kit. Fabricated parts that are smooth will provide enough surface area for the wrap to effectively cling on to and also, will give it a more durable wear.

6. Choose the Right Environment

Try to cover your car in a clean environment free from dust and do so will, at an intermediate temperature. The above assists in helping the adhesive bond properly and minimize any form of defects.